The Lyngdorf BW-2 advanced subwoofer has a slim design, exclusive sound and many possibilities
The active Lyngdorf BW-2 is designed as a high bandwidth subwoofer with the aim of reproducing music and soundtracks with full dynamics and precision.
All means are therefore aimed at the best possible sound reproduction.
The frequency range of the Lyngdorf BW-2 subwoofer is up to 800 Hz in “bypass” mode, in contrast to traditional subwoofers, which are usually limited to 150 Hz.
In other words, this is a subwoofer that follows the signal with extreme precision.
It can play music in a wider frequency range and not just the low rumble and explosions of an action movie.
Easy to integrate
The Lyngdorf BW-2 subwoofer is designed with a focus on discretion.
Available in high-gloss black or matt white, for seamless integration into any contemporary interior.
It can be placed upright or sideways to fit into any available space.
This also makes it the perfect match for any stereo or home theater system.
The Lyngdorf BW-2 subwoofer gives music and movie sound an extra heavy bass, even with most standard sound systems.
But even if you are looking for a serious installation, you will get a fantastic result in combination with a real Lyngdorf amplifier and the unique RoomPerfect ™ system.
So you can use the ultra slim and matching BEC Akustik speakers as a satellite speaker to get a balanced high-end audio system at home.
Refined Class D power
The internal amplifier is Lyngdorf’s proprietary Class-D design, based on their more than 15 years of experience designing high-quality Class-D amplifiers.
With 400 watts of power, it can provide enough power to drive the driver even at extreme levels.
More than a subwoofer
The Lyngdorf BW-2 subwoofer has two input modes.
- Line in: then this subwoofer can be used with conventional amplifiers and processors and has a frequency range of 25 to 200 Hz.
Just like with regular subwoofers, you have control over the level, frequency range and phase adjustment.
- Bypass: If you are using a Lyngdorf Audio amplifier, you can bypass the internal filters.
Now the frequency range goes from 25 to 800 Hz and you can use the BW-2 as a boundary woofer to take your system’s performance to a new level.
Type: Active high bandwidth subwoofer
Midrange driver: 10 ”long throw driver (+/- 15mm / 0.6 in), Ø 50mm / 2inch voice coil,
Cone Material: deep anodized aluminum, 2.4 kg vented magnet
Casing: closed casing, full MDF construction with a volume of 14 liters
Frequency range: 25 to 200 Hz (with line-in input), 25 to 800 Hz (with bypass input)
Maximum SPL: 106 dB RMS THX method 40-80 Hz
Sensitivity: 91dB (2.83V / 1m)
Crossover point: X-over frequency (60 to 200 Hz)
Connections: RCA / analog mono input
Dimensions (W x H x D): 44 x 32.5 x 17.2 cm
Weight: 14.4 kg
Finish: High gloss black or matt white